Eggrider C1

Eggrider C1

$259.00
(No reviews yet)
Current Stock:
Adding to cart… The item has been added
Description

EggRider C1 Color eBike Display

The EggRider C1 is a bright, full-color eBike display designed to make key ride information easier to see at a glance. Its larger animated dashboard provides clear access to battery status, speed, power, distance, and advanced ride statistics—without needing to pull out your phone.

The display includes a handlebar-mounted remote for convenient navigation through settings and ride information while riding. Pair it with the EggRider mobile app for Android or iOS to configure compatible controllers, review ride charts, and manage display settings.

Features

  • Bright, larger full-color animated dashboard for improved readability
  • Includes wired handlebar remote for navigating display information and settings
  • View essential ride information without using your phone
  • Supports voltage readings from 20V to 60V
  • Quickly switch between screen layouts and displayed information
  • Displays battery percentage, speed, power, distance, and voltage
  • Advanced ride data including energy efficiency, range estimation, and battery-cycle information
  • Tracks real battery capacity and statistics for up to three battery profiles
  • EggRider mobile app available for Android and iOS
  • Ride-history charts and in-depth trip data through the mobile app
  • Customizable compatible-controller settings, including:
    • Throttle enable/disable
    • Pedal-assist enable/disable
    • Power-level configuration

Display Specifications

Display Size 47.4 mm × 64.2 mm × 29.2 mm
Weight 100 g, including two mounts
Cable Length 30 cm
Handlebar Mount 31.8 mm clamp with rubber spacer for 22.2 mm handlebars
Physical Button Power On/Off
Connector Higo/Julet waterproof 5-pin male/female connector
Wireless Connectivity Bluetooth Low Energy (BLE)
Mounting Hardware M3 × 10 mm hex bolt; 2.0 mm diameter mounting clamp pin, approximately 15 mm long
Protection Rating IP65 dust and water resistance

Remote Specifications

Remote Size 17 mm × 43.7 mm × 44.2 mm
Weight 20 g
Cable Length 24 cm
Handlebar Mount 22.2 mm diameter
Controls Level Up/Down, Walk Assist, and Road/Off-Road mode switch
Mounting Hardware M3 × 10 mm hex bolt; 2.0 mm diameter mounting clamp pin, approximately 15 mm long
Protection Rating IP65 dust and water resistance

Please Read Before Purchase

  • Compatibility depends on your controller, wiring, connector type, and firmware configuration.
  • Please verify the connector style, pin count, voltage range, and controller compatibility before ordering.
  • Professional installation is recommended if you are unfamiliar with eBike electrical systems.
  • Refer to the EggRider user manual for setup, configuration, and safety information.

Important: This display is water-resistant, not waterproof. Do not submerge it or pressure wash the display, remote, wiring, or connectors.